TV display systems for HD security cameras. If you are interested in high definition instead of analog, you may be interested in checking out these complete How-to display your security cameras on multiple TVs - Follow these instruction if you would like to send the video signal from one or multiple security cameras on multiple TVs.This works for analog CCTV cameras and HD security cameras.
Note: If product has no serial number, record month and year of purchase instead.You are here: Home > Support & Knowledge Base > How to Connect a CCTV Camera Directly to a TV Tools required for assembly and service may not be included. Improvements, actual product may differ slightly from the product described herein.
Diagrams within this manual may not be drawn proportionally. Or form without the express written consent of Harbor Freight Tools. No portion of this manual or any artwork contained herein may be reproduced in any shape When unpacking, make sure that the product is intact and undamaged. Turn the connector clockwise to lock the pins in place. Pins on the DVR connection and push the BNCĬonnector in so the pins slide into the slots.ī. Align the slots on the BNC Connector with the You will initially need to connect the DVR to a TV monitor in order to adjust the settings, regardless of your finalĪ. Use a surge protector (sold separately) to help guard against electrical power fluctuations. Hazard or exposing the cord and cables to possible damage.ģ. Route the power cord and all cabling along a safe route without creating a tripping The work area must not allowĪccess by children or pets to prevent distraction and injury.Ģ. Designate a work area that is clean and well-lit. Each camera is labeled on the side of the unit.ġ. Test theĬameras for the best location before installing. There are two 6mmĬameras for longer range, and two 3.6mm cameras for wider angle, shorter range, viewing. Shown below, and testing all the features to insure the unit is working properly. IMPORTANT: Before mounting any of the cameras, test the unit by hooking up all the connections as The other end of the cable to the video port of the TV. The video output ports on the back of the DVR, then attach Attach the BNC connector of the Video Cable to one of Plug the Mouse into one of the USB ports.Ĩ.
Repeat steps 4 through 6 for each of the other To the same color connectors of one of the Cameras. Attach the connectors at the other end of the Camera Cable Attach the black power connector at the BNC end of the sameĬable to one of the remaining Cable Splitter connectors.Ħ. Video BNC Connector (the largest connector on theĬable) to one of the camera connections on theĥ. Working with one Camera Cable, attach the yellow Attach the connector marked “DVR Power” to theĤ. Attach the Adapter Power Cord to the Adapter.ģ. To connect the camera and power components to the DVR: Bunker Hill Security Dvr Softwareġ.
Brand Bunker Hill Security Ac Volts 120 Application Indoor/Outdoor Battery Type Alkaline Battery(S) Included (Y/N) Yes Camera Resolution (Tvl) 480 Tvl Channels (Qty.) 8 Dc Volts 12 Night Vision Yes Number Of Cameras Included 4 Temperature Range (Deg F) 14☏ - 122☏ Shipping Weight 11.80 Lb. Remote Control Uses 2 Aaa Batteries, Included. 8 Channel Surveillance DVR with 4 HD Cameras and Mobile Monitoring Capabilities Capture surveillance video indoors or outdoors with this 8-channel security camera system $ 269 99.